Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 981 — OKI MB470

Code: 981

Display: Service call
981: Error
Description: Difference between PU model version detected and CU model version detected
High-voltage power supply I/F error when initializing
86M board SRAM error
CRC check error of PU download data
86M board Flash ROM hash check error
86M board Flash ROM writing error
The communication error with ASIC on the CU board is detected
Remedy: Does the error recur? Yes Turn Off/On the power supply. Replace the 86M board.
Is the cable between 86M board and the high-voltage power supply unit correctly connected? Isn’t there defective contact point?
Reconnect correctly.Check the defective contact point of highvoltage system. Replace the high voltage power supply.
Does the error recur? Yes Turn Off the power supply again Replace the 86M board
After PU data is downloaded (PU fireware, custom media data, head correction data), CRC check error is detected. After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Does the error recur? Yes Turn on the power supply again Replace the 86M board
Does the error recur? After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Replace the 86M board.

← Xem tất cả mã lỗi OKI MB470

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie