Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 370, 371, 372, 373, 383 — OKI MC573

Code: 370, 371, 372, 373, 383

Description: Two-sided printing jam (error code 370, 371, 372, 373, 383)
Remedy: Two-sided printing jam occurs immediately after the power is turned on.
(8-1-1) Check condition of the paper running path Paper running path of the Duplex unit Check if paper is jammed or not in the paper running path. Open the top cover and remove the ID unit and belt unit, and check if any paper remains in the paper reversing path or not. Remove the jammed paper. (8-1-2) Check condition of the mechanical parts Check the sensor levers of the respective sensors of the Duplex unit. Check if shape and movement of the sensor levers have any abnormality or not. Replace the sensor lever with the good sensor lever. (8-1-3) Check condition of electrical parts Check the detection condition of the sensor signal. Confirm that the sensor signals are normally detected by using the SWITCH SCAN function of the self-diagnostic mode. Check sensor detection with paper in the duplex unit, and with it removed from the duplex unit. Replace the defective sensor or connection cable.
Two-sided printing jam occurs during taking in the paper into Duplex unit.
(8-2-1) Sensor lever operation check DUP-IN sensor lever Open the top cover, remove the ID and the belt unit, and touch the DUP-IN sensor lever to check whether it moves smoothly. Replace the DUP-IN sensor lever. DUP-IN sensor Confirm that the sensor signals are normally detected by using the SWITCH SCAN function of the self-diagnostic mode. Replace the CU/PU board, or appropriate sensor(s) or connection cord(s). (8-2-2) Check condition of the paper running path Paper inverting transport path Check that any foreign materials such as paper chip or blue do not exist that hampers the smooth movement of paper in the paper inverting transport path. Remove the foreign material. (8-2-3) Motor operation check Duplex pull-in/ reversing roller and its pinch roller Check if the pull-in/reversing roller of the Duplex unit contacts or not with the pinch roller of the cover side when the Duplex rear cover is closed. (Does the pinch roller rotate when the roller is rotating?) Replace the rear cover.
Two-sided printing jam occurs in the process of reversing paper.
(8-3-1) Sensor lever operation check DUP-R sensor lever Open the top cover, remove the ID and the belt unit, and touch the DUP-R sensor lever to check whether it moves smoothly. Replace the DUP-R sensor lever DUP-R sensor Confirm that the sensor signals are normally detected by using the SWITCH SCAN function of the self-diagnostic mode. Replace the CU/PU board, the sensor or its connection cord. (8-3-2) Motor operation check Fuser motor Visually check whether paper started being reversed. When no paper reversing operation has performed, check whether the planet gear at the lower right side of the fuser moves smoothly. Replace the planetary gear.

← Xem tất cả mã lỗi OKI MC573

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie