Code: 2-6
Description: Fuser Abnormality - Fuser does not reach the specified temperature after the specified time elapsed. - Fuser Lamp lights for ten seconds or more in standby. - Fuser temperature became 125 °C or lower during printing. - Fuser temperature became 220 °C or higher. - The thermistor (thermal sensor) have break.
Remedy: FIP1.3 Possible causative parts: FUSER ASSY HVPS/MCU LVPS HARNESS ASSY FUSER HARNESS ASSY LVPS 1 Checking the thermistor for operation Does Error occur soon after the power is turned ON? Error occurs as soon as the power is turned ON, or just after the time when a short warm up period elapsed. Replace FUSER ASSY. Go to FIP2.4 FUSER ASSY.