Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0008 — Roland CX300

Code: 0008

Description: Occurs when the big current is flowed during the stable movement in the Feed Direction.
Causes: When the cutting starts without the Pre-feed, it occurs the over load because the Roll-sheet is pulled from the Shaft. The heavy sheet, such as the Sand Blast is used with the normal or high-speed mode. The movement of the Grit Roller is heavy because of the over load.

← Xem tất cả mã lỗi Roland CX300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie