Code: 746
Description: Booklet finisher stapler/folder motor error
• The stapler/folder motor starts. However, the controller does not receive the signal from the encoder sensor within 0.1 second. • The stapler/folder motor starts to drive the stapler unit, and the stapler switch is on. However, the controller does not receive the signal from the home position sensor for 0.5 second. • The stapler starts to staple the paper. However, the controller does not receive any signal from the home position sensor, and the stapler switch is off. • The stapler/folder motor starts to drive the folder rollers. However, the home position sensor does not turn off within 9.247 seconds. • The home position sensor does not turn on within 9.247 seconds after this same sensor turns off.
• The stapler/folder motor starts. However, the controller does not receive the signal from the encoder sensor within 0.1 second. • The stapler/folder motor starts to drive the stapler unit, and the stapler switch is on. However, the controller does not receive the signal from the home position sensor for 0.5 second. • The stapler starts to staple the paper. However, the controller does not receive any signal from the home position sensor, and the stapler switch is off. • The stapler/folder motor starts to drive the folder rollers. However, the home position sensor does not turn off within 9.247 seconds. • The home position sensor does not turn on within 9.247 seconds after this same sensor turns off.
Causes: • Malfunction of the stapler/folder motor • Loose connection of the stapler/folder motor • Loose connection of the encoder sensor • Defective encoder sensor • Loose connection of the stapler switch • Defective stapler switch • Loose connection of the stapler home position sensor • Defective stapler home position sensor • Loose connection of the folder-roller home-position sensor • Defective folder-roller home-position sensor