Code: SC740
Description: Finisher Corner Stapler Motor Error: 3K Finisher B830
The stapler motor did not switch off within 600 ms after operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
The stapler motor did not switch off within 600 ms after operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Number of sheets in the stack exceeded the limit for stapling
• If error occurred during stapling, stapler rotation sensor 1 defective (replace stapler)
• If error did not occur during stapling: staple jam:
1 Motor blocked by an obstruction
2 Stapler motor harness loose, broken, defective
3 Corner stapler motor defective
4 Main control board defective
• If error occurred during stapling, stapler rotation sensor 1 defective (replace stapler)
• If error did not occur during stapling: staple jam:
1 Motor blocked by an obstruction
2 Stapler motor harness loose, broken, defective
3 Corner stapler motor defective
4 Main control board defective