Code: SC670
Description: Engine Startup Error
At power on or after the machine leaves the energy conservation mode:
• ENGRDY signal does not assert
• IPURDY signal does not assert After power on and the prescribed time has elapsed:
• No EC response from the engine
• No PC response from the engine
• No SC response from the engine During machine operation mode:
• Write to Rapi drive failure (could not locate destination on the PCI)
• After the /ENGRDY signal asserts with no effect.
At power on or after the machine leaves the energy conservation mode:
• ENGRDY signal does not assert
• IPURDY signal does not assert After power on and the prescribed time has elapsed:
• No EC response from the engine
• No PC response from the engine
• No SC response from the engine During machine operation mode:
• Write to Rapi drive failure (could not locate destination on the PCI)
• After the /ENGRDY signal asserts with no effect.
Causes: • BCU ÅÆ Controller Board disconnected
• BCU board defective
• Controller board defective
• Mother board defective
• Software error; switch off/on, if that fails, change the engine firmware
• PSU-E or PSU-C defective
• BCU board defective
• Controller board defective
• Mother board defective
• Software error; switch off/on, if that fails, change the engine firmware
• PSU-E or PSU-C defective