Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 504-02 — Ricoh B237 MPC3000 AT-C1b

Code: 504-02

Description: Tray 4 error (3 Tray Paper Feed Unit)
This SC is generated if the following condition occurs 3 consecutive times. For the two-tray paper feed unit. When the tray lowers, the tray lift sensor does not go off within 1.5 sec. For the LCT. If the upper limit does not go off for 1.5 seconds even the tray lift motor turns on to lower the tray after the upper limit has been detected at power on.
Causes: Defective tray lift motor or connector disconnection. Defective lift sensor or connector disconnection
Remedy: 1. Check the cable connections. 2. Check and/or replace the defective component.

← Xem tất cả mã lỗi Ricoh B237 MPC3000 AT-C1b

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie