Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 622 — Ricoh B237 MPC3000 AT-C1b

Code: 622

Description: Paper tray unit communication error
While the BICU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. The BICU receives the break signal which is generated by the peripherals only just after the main switch is turned on. When the BICU does not receive an OK signal from a peripheral 100ms after sending a command to it. The BICU resends the command. The BICU does not receive an OK signal after sending the command 3 times.
Causes: Cable problems. BICU problems. PSU problems in the machine. Main board problems in the peripherals.
Remedy: 1. Check if the cables of peripherals are correctly connected. 2. Replace the PSU if no power is supplied to peripherals. 3. Replace the BICU or main board of peripherals.

← Xem tất cả mã lỗi Ricoh B237 MPC3000 AT-C1b

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie