Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC876 — Ricoh D046 MPW5100 Be-C1

Code: SC876

Description: Log data errors GW These errors occur when the machine tries to acquire the log data immediately after power on or upon leaving the energy save mode.
Causes: SC876-1 D Log data error 1 Log data file corrupted • Do SP5832-4 (HDD Formatting - Job Log). SC876-2 D Log data error 2 There was no data encryption module available when there was an attempt to set up data encryption. This error can occur at power on, while the machine is operating, or when the data encryption settings are set up or changed. • Replace the data encryption board • Do the set up procedure again SC876-3 D Log data error 3 NVRAM error. The log encryption key was disabled when the machine was turned on. • Do SP5832-4 (HDD Formatting - Job Log) • Disable the log encryption settings SC876-4 D Log data error 4 NVRAM error 2. One of the following occurred: • Although log encryption has been disabled, the log data file was encrypted. • Although the log encryption has been enabled, the log data file was not encrypted. • Do SP5832-4 (HDD Formatting - Job Log) SC876-5 B Log data error 5 NVRAM, HDD switch error. This error can occur when the NVRAM or the HDD is removed and installed in another machine. • Remove the NVRAM and replace it with the original NVRAM. • Remove the HDD and replace it with the original HDD. • With the SC code displayed, do SP5832-4 (HDD Formatting - Job Log) SC876-99 B Log data error 99 Other errors. . • Contact the service center if this SC appears
Remedy: If only the HDD is replaced: 1. Switch off the machine. 2. Remove the HDD, switch the machine on again. 3. Do SP5801-19 (Memory Clear - LCS). 4. Switch off the machine. 5. Reinstall the original HDD and switch on the machine. 6. Do SP5832-4 (HDD Formatting - Job Log). 7. Cycle the machine off/on. 8. Do SP9730-2 and switch it ON (set to "1"). 9. Do SP9730-3 and switch it ON (set to "1"). 10. Do SP9730-4 and switch it ON (set to "1"). 11. Cycle the machine off/on.

← Xem tất cả mã lỗi Ricoh D046 MPW5100 Be-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie