Code: 542
Description: Fusing temperature warm-up error
One of the following occurred: • After power on, or after closing the front door, the hot roller does not reach the 100°C control temperature within 25 s. • 5 sec. after temperature rise started, temperature remained below 21°C after 5 samplings. • Fusing unit did not attain reload temperature within 48 s. of the start of fusing temperature control.
One of the following occurred: • After power on, or after closing the front door, the hot roller does not reach the 100°C control temperature within 25 s. • 5 sec. after temperature rise started, temperature remained below 21°C after 5 samplings. • Fusing unit did not attain reload temperature within 48 s. of the start of fusing temperature control.
Causes: • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat not operating
Remedy: