Code: 794
Description: Finisher: Rear jogger motor error with side tray
The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective rear jogger motor • Loosen connection • Motor overload • Defective rear jogger fence HP sensor
Remedy: 1. Replace the rear jogger fence HP sensor. 2. Replace the rear jogger motor.