Code: 220-02
Description: Laser synchronizing detection error: start position LD1: Ma
The laser synchronizing detection signal for the start position of the LDB is not output for the prescribed time after the LDB unit turns on while the polygon motor is rotating normally
The laser synchronizing detection signal for the start position of the LDB is not output for the prescribed time after the LDB unit turns on while the polygon motor is rotating normally
Causes: Broken I/F harness of synchronizing detection unit. Defective synchronizing detection board. Defective LDB. Defective BICU
Remedy: 1. Turn off and on the main power switch. 2. Replace the I/F harness. 3. Replace the BICU.