Code: 508
Description: By-pass bottom plate error
The signal from the by-pass tray HP sensor does not change for 2 seconds after the by-pass bottom plate clutch was activated. If this condition occurs three consecutive times, this SC is generated.
The signal from the by-pass tray HP sensor does not change for 2 seconds after the by-pass bottom plate clutch was activated. If this condition occurs three consecutive times, this SC is generated.
Causes: Disconnected or defective connectors of the by-pass bottom plate clutch. Disconnected or defective by-pass HP sensor. Defective by-pass bottom plate detection filler
Remedy: 1. Check or replace the connectors of the by-pass bottom plate clutch. 2. Check or replace the by-pass HP sensor.