Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 542-02, 542-03 — Ricoh D117 MPC305SPF GR-C1

Code: 542-02, 542-03

Description: Heating roller thermopile reload error. The heating roller temperature does not reach 80C within the prescribed time. The center temperature of the heating roller does not reach the target reload permit temperature within the prescribed time. The center temperature of the heating roller does not reach the target temperature after starting the heater control in warm up with low temperature.
Causes: Dirty or defective thermopile lenses. Defective thermistor. Input voltage out of specification (out of warranty).
Remedy: 1. Check and clean the thermopile lenses. 2. Check if the heating roller thermopile is firmly connected. 3. Replace the thermopile.

← Xem tất cả mã lỗi Ricoh D117 MPC305SPF GR-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie