Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 547-01 — Ricoh D117 MPC305SPF GR-C1

Code: 547-01

Description: Zero cross error: fusing lamp relay contact welding
The zero cross signal is detected three times even though the heater relay is off when turning on the main power. The zero cross signal is not detected for 2 seconds even though the heater relay is on after turning on the main power or closing the front door. The detection error occurs twice or more in 11 zero cross signal detections. This error is defined when the detected number of zero cross signals is less than 45.
Causes: Defective fusing lamp relay (welded contacts). Defective fusing lamp relay circuit.
Remedy: 1. Turn off and on the main power switch. 2. Replace the PSU if the fusing lamp relay is defective. 3. Check the connection of the PSU to the controller board and replace the harness or controller board if necessary.

← Xem tất cả mã lỗi Ricoh D117 MPC305SPF GR-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie