Code: 401
Description: Transfer roller leak error 1
A transfer roller current leak signal wad detected. (The current feedback signal for the transfer roller was not detected within the correct time.)
A transfer roller current leak signal wad detected. (The current feedback signal for the transfer roller was not detected within the correct time.)
Causes: • High voltage supply board set incorrectly or defective • Transfer roller set incorrectly or damaged • Transfer unit set incorrectly
Remedy: 1. Check the high voltage supply board is set correctly. 2. Check the harness of the high voltage supply board. 3. Replace the high voltage supply board. 4. Check the transfer roller is set correctly. 5. Replace the transfer roller. 6. Check the transfer unit is set correctly.