Code: 740
Description: Corner stapler motor error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For 1000-sheet (booklet) finisher • The stapler motor does not switch off within the prescribed time after operating. • The HP sensor of the staple unit does not detect the home position after the staple unit moves to its home position. The HP sensor of the staple unit detects the home position after the staple unit moves from its home position.
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For 1000-sheet (booklet) finisher • The stapler motor does not switch off within the prescribed time after operating. • The HP sensor of the staple unit does not detect the home position after the staple unit moves to its home position. The HP sensor of the staple unit detects the home position after the staple unit moves from its home position.
Causes: • Staple jam • Number of sheets in stack exceeds allowed number of sheets for stapling • Stapler motor obstructed • Stapler motor defective
Remedy: 1. Check the connections and cables for the components mentioned above. 2. Replace the HP sensor and/or stapler motor. 3. Replace the finisher main board.