Code: 793-03, 794-03
Description: Pick-up roller contact motor error 1-bin tray (D586)
The machine does not detect a correct signal from the pick-up roller HP sensor while the pick-up roller contact motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
The machine does not detect a correct signal from the pick-up roller HP sensor while the pick-up roller contact motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective pick-up roller contact motor • Loosen connection • Motor overload • Defective pick-up roller HP sensor
Remedy: 1. Replace the pick-up roller HP sensor. 2. Replace the pick-up roller contact motor.