Code: 720-41
Description: Feed-Out Belt Motor Error (D611/D612) The stack feed-out belt HP sensor does not activate within the specified time after the stack feed-out belt motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Stack feed-out HP sensor harness loose, broken, defective • Stack feed-out HP sensor defective If the motor is not operating: • Feed-out motor blocked by an obstruction • Feed-out motor harness loose, broken, defective • Feed-out motor defective • Booklet finisher main board defective