Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 722-41 — Ricoh D131 MP6002

Code: 722-41

Description: Feed-Out Belt Motor Error (D610) The stack feed-out belt HP sensor does not activate within the specified time after the stack feed-out belt motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Stack feed-out HP sensor harness loose, broken, defective • Stack feed-out HP sensor defective If the motor is not operating: • Feed-out motor blocked by an obstruction • Feed-out motor harness loose, broken, defective • Feed-out motor defective • Booklet finisher main board defective

← Xem tất cả mã lỗi Ricoh D131 MP6002

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie