Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC501-13 — Ricoh D135 MPC6502SP CH-C1

Code: SC501-13

Description: 1st Tray Lower Limit Error (Tandem tray/Tandem LCT) 1st tray lift motor lower limit error was detected. If detected for the first or second time: User is instructed to set paper again. If detected for the third time: SC displayed (only the corresponding tray) The count of detections is reset when successful operation is detected and at power off/on.
Causes: • 1st tray lift motor disconnected/harness broken/defective • 1st tray lift sensor disconnected/defective/smudged • Paper end sensor disconnected/defective/smudged • Paper overloaded • Foreign object (such as a piece of paper) is stuck between the paper tray and the tray lift motor. • Paper set incorrectly.
Remedy: • Load paper again. • Check the harness of the tray lift sensor,/reconnect the sensor connector/clean the sensor/replace the sensor/replace the 1st tray. • Check the harness of the paper end sensor/reconnect the sensor connector/clean the sensor/replace the sensor. • Replace the 1st tray lift motor/reconnect the connector/replace the harness/replace the PFB/Replace the right tray (of the tandem tray)/replace the driven unit.

← Xem tất cả mã lỗi Ricoh D135 MPC6502SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie