Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC544-00 — Ricoh D135 MPC6502SP CH-C1

Code: SC544-00

Description: Heating Roller Center: Overheat detection (hardware) Hardware detection of overheat condition. The heating roller center thermopile was detected as the cause.
Causes: • IOB defective • Fuser control software running out of control • Heating roller center thermopile defective • IH inverter supplied continuously (software error or temperature sensor malfunctioning
Remedy: • After removing the cause of the SC, set "Fusing SC Clear" in the SP mode. • If necessary, replace: IOB/heating roller center thermopile/IH coil/ IH inverter.

← Xem tất cả mã lỗi Ricoh D135 MPC6502SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie