Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC552-02 — Ricoh D135 MPC6502SP CH-C1

Code: SC552-02

Description: Sensor 4: Heating Roller Center: Reload Failure: Timeout 1 Failed to reach (T2) degrees centigrade after (t4) seconds from the start of heater control. D135 (Japan):T2 = 45, t4 = 80 D136 (Japan)/D135 (NA): T2 = 45, t4 = 60 D136 (NA)/D135 (EU)/D136(EU): T2 = 45, t4 = 60 D137 (Japan): T2 = 45, t4 = 60 D138 (Japan)/D137 (NA)/D138 (NA)/D137 (EU)/D138 (EU): T2 = 45, t4 = 60 Monitored at: Startup (Power-on, when a cover is closed, when fuser heater is under control)
Causes: • Thermistor deformed or floating • Input voltage out of specification
Remedy: • Replace the thermopile. • Use with supported input voltage • Replace the pressure roller heater. • Replace the unit.

← Xem tất cả mã lỗi Ricoh D135 MPC6502SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie