Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC381-03 — Ricoh D136 MPC8002SP CH-C1

Code: SC381-03

Description: Potential sensor output high error (M). Vd(700) greater than 800[-V] Details: In Vd detection, which is done at the beginning of process control, the measured potential (Vd) is converted to the potential when -700 V is applied to the drum (Vd700) and used to check the potential sensor.
Causes: Potential sensor dirty (foreign object, such as toner, entering the probe window) / potential sensor probe connector disconnected
Remedy: • Check if the potential sensor probe is clean. If it is dirty, blow it with air and then check again. If this does not work, replace the potential sensor. • Potential sensor probe connector is disconnected.

← Xem tất cả mã lỗi Ricoh D136 MPC8002SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie