Code: SC516-02
Description: Sensor Shift Motor Edge Detection Error When an error occurs during sensor shift motor edge detection, the machine handles it as a jam (JAM097) the first two times and displays the SC No. on the control panel the third time.
Causes: • Sensor shift motor connector disconnected or defective • Motor driver defective • Edge detection sensor connector disconnected or defective • Sensor shift motor does not move because of overload which may be due to foreign objects, etc. • Sensor shift home position sensor deformed, damaged or connected incorrectly • Wrong paper size
Remedy: • Load paper again. • Clean the edge detection sensor and check its harness. • Reconnect the connectors of sensor shift motor and edge detection sensor. • Check and, if necessary, replace: sensor shift motor, edge detection sensor, harness, circuit board (PFB, DUB), unit, driven unit.