Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC542-02 — Ricoh D136 MPC8002SP CH-C1

Code: SC542-02

Description: Sensor 1: Heating Roller Center: Reload Failure: Timeout 1 Failed to reach (T2) degrees centigrade after (t4) seconds from the start of heater control. D135 (Japan):T2 = 80, t4 = 100 D136 (Japan)/D135 (NA): T2 = 80, t4 = 80 D136 (NA)/D135 (EU)/D136(EU): T2 = 80, t4 = 80 D137 (Japan): T2 = 80, t4 = 80 D138 (Japan)/D137 (NA)/D138 (NA)/D137 (EU)/D138 (EU): T2 = 80, t4 = 80 Monitored at: Startup (Power-on, when a cover is closed, when fuser heater is under control)
Causes: • Thermopile lens smudged • Input voltage out of specification
Remedy: • Replace the thermopile. • Use with supported input voltage • Replace the IH coil/IH inverter. • Replace the unit.

← Xem tất cả mã lỗi Ricoh D136 MPC8002SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie