Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC563-00 — Ricoh D136 MPC8002SP CH-C1

Code: SC563-00

Description: Sensor 2: Heating Roller Front: Overheat detection (software) (T3) degrees centigrade or higher was detected for (t6) seconds consecutively. Number of times: 10 or more D135 (Japan):T3 = 250, t5 = 1 D136 (Japan)/D135 (NA): T3 = 250, t5 = 1 D136 (NA)/D135 (EU)/D136(EU): T3 = 250, t5 = 1 D137 (Japan): T3 = 250, t5 = 1 D138 (Japan)/D137 (NA)/D138 (NA)/D137 (EU)/D138 (EU): T3 = 250, t5 = 1 Monitored at: All times, though SC is not issued when temperature is not controlled (when in off mode/sleep mode, when a door, excluding the toner supply door, is open, or when the heater relay is off).
Causes: • Triac shorted. • IOB board defective.
Remedy: • Replace the IOB board. • Replace the unit.

← Xem tất cả mã lỗi Ricoh D136 MPC8002SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie