Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC665-04 — Ricoh D136 MPC8002SP CH-C1

Code: SC665-04

Description: IOB does not start The IOB_WAKE signal of the IOB and the PFB is not "WAKE". (Occurs when either 2 Vodkas in the IOB or 3 Vodkas in the PFB are in the reset status. Details: • Detected when IOB_WAKE signal from the 2 Vodkas on the IOB (PIB function, FSB function) and 3 Vodkas on the FSB stay in the WAKE status. • IOB_WAKE signal is output from 5 Vodkas as explained above and if at least one of them is "WAKE", IOB_WAKE is not canceled.
Causes: • IOB damaged • PFB damaged • BCU defective • Harness between BCU and IOB: Ground fault • Harness between IOB and PFB: Ground fault • PSU5V not output
Remedy: • Replace the harness between IOB and PFB. • Replace the harness between BCU and IOB. • Replace the IOB. • Replace the PFB. • Replace the BCU board. • Replace the PSU.

← Xem tất cả mã lỗi Ricoh D136 MPC8002SP CH-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie