Code: 742
Description: Stapler movement motor
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For 1000-sheet (booklet) finisher • The stapler HP sensor is not activated within the specified time after the stapler motor turned on.
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For 1000-sheet (booklet) finisher • The stapler HP sensor is not activated within the specified time after the stapler motor turned on.
Causes: • Stapler or motor drive is blocked by obstruction • Motor harness loose or broken • Stapler HP sensor harness loose, broken • Motor defective • Stapler HP sensor defective
Remedy: 1. Check the connection of the stapler movement motor. 2. Check the connection of the stapler home position sensor. 3. Replace the stapler home position sensor. 4. Replace the stapler movement motor.