Code: 725
Description: Finisher exit guide plate motor error
The exit guide plate HP sensor did not activate within the prescribed time after the exit guide plate motor turned on.
The exit guide plate HP sensor did not activate within the prescribed time after the exit guide plate motor turned on.
Causes: • Finisher exit guide plate motor drive is obstructed (jammed paper, paper scraps, etc.) • Exit guide plate motor harness loose, broken • Exit guide plate HP sensor harness loose, broken • Exit guide plate motor defective • Exit guide plate HP sensor defective
Remedy: 1. Check the connections and cables for the components mentioned above. 2. Check for blockages in the exit guide plate motor mechanism. 3. Replace the exit guide plate position sensor and/or exit guide plate motor. 4. Replace the finisher main board.