Code: 760
Description: Finisher punch motor error (D589)
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Punch HP sensor harness loose, broken • Punch motor harness loose, broken • Punch motor obstructed • Punch motor defective • Punch HP sensor defective
Remedy: 1. Check the connections and cables for the punch motor and HP sensor. 2. Check for blockages in the punch motor mechanism. 3. Replace the punch motor harness. 4. Replace the punch HP sensor and/or punch motor 5. Replace the finisher main board.