Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 995 — Ricoh D141 MP3352

Code: 995

Description: Controller Board Mismatch
Causes: • Defective BCU • NVRAM Replacement error
Remedy: -001 • Defective BCU • NVRAM Replacement error 1. Install the previous NVRAM. 2. Input the serial number with SP5811-004, and turn the main power switch off/on. IMPORTANT: When the BCU is replaced with a new one, this SC will occur. Therefore, make sure to do Step #2 above. Turning the power off/on links the NVRAM with the S/N information in the BCU. -002 • Defective NVRAM • Defective controller 1. Update the controller firmware. 2. Install a new NVRAM, and turn off and on the main power switch after SC995-002 has occurred. IMPORTANT: When the NVRAM is replaced with a new one, this SC will occur. Therefore, make sure to do Step #2 above. Turning the power off/on allows the NVRAM to recognize the S/N. -003 • Incorrect type controller installed • Defective controller Replace the controller with the correct type. -004 • Incorrect model controller installed. Replace the controller with the correct model.

← Xem tất cả mã lỗi Ricoh D141 MP3352

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie