Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC361 — Ricoh A257 Aficio Color 6010 Cattleya

Code: SC361

Description: Revolver HP sensor error - Timing & Condition - The home position is not detected during 3 revolution of the revolver unit after the revolver motor turns on.
Causes: • Poor connection of connector • Dirty sensor • Defective sensor • Defective revolver motor • Defective revolver drive board • Defective I/O control board • Defective main control board
Remedy: 1. Check if the connector of sensor is properly connected. 2. Replace the revolver H.P. sensor if the voltage at CN216-B5 on the I/O control board does not change when covering the sensor with a piece of paper. NOTE: Make sure that the revolver unit is locked in this step. 3. If the revolver unit does not rotate; 1 Replace the revolver motor. 2 Replace revolver motor drive board. 3 Replace the I/O control board. 4 Replace the main control board. [ Signal Check ] • Revolver H.P.: CN216-B5 or TP107 on I/O control board

← Xem tất cả mã lỗi Ricoh A257 Aficio Color 6010 Cattleya

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie