Code: SC370
Description: TD sensor detection abnormal (K) - Timing - When communicating with TD sensors, during printing process, or process control self-check - Condition - TD sensor output exceeds 4.5V or becomes lower than 0.5V.
Causes: • Poor connection of TD sensor harness • Dirty sensor surface • Defective TD sensor • Toner density is out of range
Remedy: 1. Check if the TD sensor connector is properly connected. 2. Clean the surface of the TD sensor. 3. Replace the TD sensor. If it becomes OK after the sensor is replaced, replace the developer of color related to the problem. If the problem is related to the toner density (too low or high), find a cause and fix it.