Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC541 — Ricoh A257 Aficio Color 6010 Cattleya

Code: SC541

Description: Hot roller thermistor open - Timing - at every 1 second when the fusing unit is set - Condition - The hot roller thermistor output is almost close to 5V, which is correspond to 0°C, for 6 seconds continuously
Causes: • Fusing unit not set properly • Poor connection of connector • Defective thermistor • Defective I/O control board • Defective main control board
Remedy: 1. Check if the fusing unit is properly set. 2. Check if the thermistor connector is properly connected. 3. Replace the thermistor if it is deformed. 4. Replace the thermistor if it is opened by measuring the resistance. (Refer to the attached Temperature/ Resistance Conversion Reference Table.) 5. Replace the I/O control board. 6. Replace the main control board. [ Signal Check ] • Thermistor: CN214-A4, TP234, or CN211-B1 on I/O control board / CN302-B9 or TP117 on main control board.

← Xem tất cả mã lỗi Ricoh A257 Aficio Color 6010 Cattleya

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie