Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC444-00 — Ricoh D177 MPC2503 MET-C1

Code: SC444-00

Description: Image transfer phase sensor error Phase sensor signal does not become L->H or H->L for 1.2 sec (time to perform 1.5 or more rotations even when transfer gear is at minimum speed) during motor ON, an image transfer phase sensor error log SC is displayed.
Causes: • Sensor dirt • Sensor defective • Connector disconnected • Harness broken
Remedy: • Clean the sensor • Replace the sensor • Reset the connector • Check the harness

← Xem tất cả mã lỗi Ricoh D177 MPC2503 MET-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie