Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC101 — Ricoh A258 Aficio Color 3006 Iris

Code: SC101

Description: Exposure lamp failure - Timing & Condition - • The lamp output check signal (LAMPDET) is still HIGH 250 ms after the lamp turns on (the ON check is canceled if the lamp goes off within 250 ms). • The lamp output check signal is still LOW 30ms after the lamp turns off (the OFF check is canceled if the lamp turns on within 30 ms).
Causes: • Blown lamp • Blown thermostat • Blown fuse (FU103) • Defective lamp regulator • Poor connection of cables • Defective cables • Defective scanner IPU board • Defective PSU
Remedy: 1. Visually check the lamp element or check the continuity between both ends of the lamp terminals with a multimeter. 2. Check continuity at the ends of the thermostat terminals with a multi-meter. 3. Check if the connectors (CN1, CN2, and CN3) on the lamp regulator are properly connected. 4. Check the continuity of the 3 cables. 5. Replace the lamp regulator if 100Vac is present at the CN3-1 and 5 on the lamp regulator. 6. Replace the scanner IPU board - Signals to Check - • LAMPDET: CN502-2 on lamp regulator / CN403-12 on scanner IPU board • LAMPTRIG: CN403-11 on scanner IPU board / CN502- 3 on lamp regulator

← Xem tất cả mã lỗi Ricoh A258 Aficio Color 3006 Iris

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie