Code: SC191
Description: Bar code scan error - Timing - Just after the main switch is turned on - Condition - The scanner IPU board detects that the bar code pattern scanned in is not appropriate.
Causes: • Non-standard bar code label • Improper location of bar code • Dirty bar code • Defective scanner IPU board • Defective main control board
Remedy: 1. Check if the bar code is damaged or scratched. 2. Clean the optics section components, such as mirrors and lenses, and the bar code label. 3. Check if the mirrors are properly positioned on the 1st and 2nd scanners. If the spring plate which secures the mirrors is out of position, it causes the light axis to be changed. 4. Replace the scanner IPU board. 5. Replace the main control board.