Code: SC323
Description: LD error - Timing - During LD writing - Condition - The LD main control board detects over-current or no feedback signal from the LD drive board.
Causes: • Poor connection of connector • Defective LD drive board • Defective LD main control board • Defective main control board
Remedy: 1. Check if the connectors (CN1 & CN605) on the LD drive board and LD main control board are properly connected. 2. Check the continuity of the cable. 3. Check that the cable connectors (CN601 & CN306) on the LD control board and main control board are properly connected. 4. Replace the LD drive board. 5. Replace the LD main control board 6. Replace the main control board.