Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC794-10 — Ricoh D182 MP2553 OR-C2

Code: SC794-10

Description: Stapler motor error. The machine does not detect a correct signal from the stapler motor HP sensor while thestapler motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Staple jam • Defective stapler motor • Loosen connection • Motor overload • Defective stapler motor HP sensor
Remedy: • Remove the jammed staple. • Reset the connector • Replace the stapler motor HP sensor. • Replace the stapler motor.

← Xem tất cả mã lỗi Ricoh D182 MP2553 OR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie