Code: SC721-24
Description: Paper Exit Guide Plate Open/Close motor Error (1000-sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During movement from home, the home position was detected for longer than a predetermined pulse (p1 pulse) (1st time is jam notification, 2nd time is SC notification). • The return pulse to home and pulse coming from home during normal operation are calculated and measured. The pulses which are 1.5-2 times the normal operation pulse are taken as p0 and p1.
Causes: • Motor defective • Connector disconnected • Overload • Encoder error • Home position sensor error
Remedy: • Replace the motor. • Reset the connector. • Replace the harness. • Replace the home position sensor • Replace the finisher main board.