Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC721-25 — Ricoh D183 MP3053 OR-C2

Code: SC721-25

Description: Punch Drive Motor Error (1000-sheet finisher) • During movement to home, the home position could not be detected within a predetermined time (t0 sec) (1st time is jam notification, 2nd time is SC notification). • During movement from home, the home position was detected even after a predetermined time (t1 sec) elapsed (1st time is jam notification, 2nd time is SC notification). • Output from the encoder could not be counted for a predetermined number of times within a predetermined time (t0 sec) (1st time is jam notification, 2nd time is SC notification). • The time to return to home without fail, the time coming from home, and the time for which the encoder output can be counted during normal operation, are taken as t0, t1 and t2.
Causes: • Motor defective • Connector disconnected • Overload • Encoder error • Home position sensor error
Remedy: • Replace the motor. • Reset the connector. • Replace the harness. • Replace the home position sensor • Replace the finisher main board.

← Xem tất cả mã lỗi Ricoh D183 MP3053 OR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie