Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 142-00 — Ricoh D196 MPC406ZSPF GR-C2

Code: 142-00

Description: White level detection error The white peak level cannot be in the prescribed value when adjusting the scanner gain. This SC is detected when the scanner power is turned on and the machine returns from the energy saver mode.
Causes: • Dirty exposure glass or optics section • SBU defective • Exposure lamp defective • Lamp stabilizer defective • Scanner motor defective
Remedy: 1. Check if the SC occurs by turning the power off then on. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 2. Reconnect the following connector. SBU-BiCU harness (FFC) connector SBU-LEDB harness (FFC) connector (SBU) 3. Check the white plate (Exposure glass) Replace the exposure glass, if dirty or damaged. 4. Replace the scanner carriage. 5. Replace the BiCU. 6. Replace the harness (FFC).

← Xem tất cả mã lỗi Ricoh D196 MPC406ZSPF GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie