Causes: [3003] HDD timeout Check performed only when HDD is installed: • HDD device busy for over 31sec. • After a diagnostic command is set for the HDD, but the device remains busy for over 6sec. • HDD defective • HDD harness disconnected, defective • Controller board defective • Replace the HDD. • Replace the HDD connector. • Replace the controller board. [3004] Diagnostic command error No response to the self-diagnostic command from the ASIC to the HDD. HDD defective Replace the HDD. [3013] HDD timeout (first machine) HDD device busy for over 31 seconds. A diagnostic command is set for the HDD, but the device remains busy for over 6 seconds. • Defective HDD device • Defective HDD connector • Defective ASIC device • Replace or remove the HDD device. • Replace the HDD connector • Replace the controller board [3014] Diagnostics command error (First machine) Result of the issuance of diagnostic command is error. Defective HDD device Replace the HDD device.