Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 874 — Ricoh D196 MPC406ZSPF GR-C2

Code: 874

Description: Delete all error. An error occurred while data was being erased on HDD or NVRAM.
Causes: • Error detected in HDD data delete program • Error detected in NVRAM data delete program • The “Delete All” option was not set
Remedy: • Turn the main power switch off and back on, and then execute "Erase All Memory" under UP mode again. (However, if there is a defective sector or other problem with the hard disk, the error will persist even after trying the above.) • If the "Delete All" option is not installed when this error occurs, install the option.

← Xem tất cả mã lỗi Ricoh D196 MPC406ZSPF GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie