Code: SC690
Description: Application selection error - Timing & Condition - When the main CPU communicates with CPUs on other PCBs, the main CPU does not receive response from the others.
Causes: • Scanner IPU firmware upgrade • Poor connection of connectors • Defective scanner IPU board • Defective main control board • Main boards of options
Remedy: • If this SC code is displayed after the scanner IPU firmware is changed, the IC card may still be in the slot. Turn the main switch off and on after removing the IC card. 1. Check if the connectors on the main control board, scanner IPU board, and the main board on each option are properly connected. 2. Replace the defective boards.