Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC721-52 — Ricoh D198 MP3054 Cor-C1

Code: SC721-52

Description: Folding Blade Motor Error (1K sheet finisher) • Motor driver detects an error (short-circuit and overheating) (1st time is SC). • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During movement from home, the home position was detected for longer than a predetermined pulse (p1 pulse) (1st time is jam notification, 2nd time is SC notification). The return pulse to home and pulse coming from home during normal operation are calculated and measured. The pulses which are 1.5-2 times the normal operation pulse are taken as p0 and p1.
Causes: • Motor defective • Connector disconnected • Overload • Center-folding blade HP sensor, or center-foliding cam HP sensor defective
Remedy: • Replace the folding blade motor • Reset the connector • Replace the center-folding blade HP sensor • Replace the harness • Replace the main board of the finisher

← Xem tất cả mã lỗi Ricoh D198 MP3054 Cor-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie