Code: SC522
Description: Duplex - Side fence jogger H.P. error - Timing & Condition - • The home position is still detected a few seconds after the side fence leaves from the home position. • The home position is not detected 12 seconds after the side fence moves back to the home position.
Causes: • Duplex unit not set properly • Excessive load • Poor connection of connector • Defective side fence motor • Defective I/O control board
Remedy: 1. Pull out and re-insert the duplex unit. 2. Check the connector (CN485) is properly connected on the duplex control board. 3. Check if anything causes overload to the motor. 4. Replace the side fence motor (Output Check: SP 5-804 93 and 94). 5. Replace the I/O control board