Code: SC503-32
Description: 3rd Tray Lowering Error (LCIT: D695) • The machine detects the lift error of the tray lift motor for the LCIT (D695) 3 times consecutively when the 3rd tray is lowered at the machine’s initialization. • The machine detects the lift error of the tray lift motor for the LCIT (D695) 3 times consecutively when the 3rd tray is lifted at the machine’s initialization. (The message of resetting the tray is displayed when the machine detects the error consecutively 2 times or less.)
Causes: • Tray lift motor connector disconnected • Lower limit sensor harness disconnected or broken • Control board defective • Foreign matter, such as paper scrap, is caught between the right tray and the tray lift motor. • Paper set fault • Timing belt damage or dropout • Timing pulley damage or dropout • Base plate damaged or plate horizontality fault • Foreign matter, such as paper scrap, is caught inside the right tray.
Remedy: • Reset the paper. • Remove the foreign matter. • Replace the tray lift motor. • Reset the connector. • Replace the harness. • Replace the lower limit sensor. • Replace the control board for the LCIT (D695). • Replace the tray. • Replace the timing belt. • Replace the timing pulley. • Replace the base plate.